Steam Cleaner
Description
KARCHER STEAM CLEANER SC2 EASYFIX The Kärcher SC2 can start working on deep cleaning in your home, eliminating 99.99% of typical household bacteria and 99.99% of enveloped viruses. All it needs is water directly from the tap. The SC2 is easy to move around your home because of its lightweight design (weighing less than 3kg), enabling you to clean the tough stains, wherever they may be. Application areas:
- Hard floors
- Fittings
- Sinks
- Wall tiles
- Windows and glass surfaces
- Exhaust hoods
- Hobs
Instructions
- Connect the required accessories to the steam gun.
- Use the extension tubes if necessary. To do so, connect one or both extension tubes to the steam gun. Insert the required accessories on the free end of the extension tube.
- Fill the boiler with a maximum of 1 liter of fresh tap water. Screw the safety cap back onto the device
- Place the unit securely on a firm surface. Insert the mains plug into a socket. Both indicator lamps must illuminate. The orange indicator lamp goes out after approximately 8 minutes. The steam cleaner is ready to use.
- Disconnect the mains plug from the socket. Push the steam switch until steam discharge stops. Now, the boiler of the appliance is unpressurised.
REFER TO MANUAL BELOW, PAGE 9 FOR 'Adjusting the Steam Quantity' AND 'Refilling Water'
Safety Steps
Do not use steamer for any other purpose than mentioned in the manual. Refer to manual below.